Wind Screen w/ mounts
The wind screen mounting bracket are
model specific, no generic one size fits all.
The brackets are
rigidly mounted to the
upper triple clamp and handle bar front clamp
bolts in most applications.
The plastic is
attached with nylon hardware and is easily
removable in less than 1 minute with the use of a
The plastic is 18” tall, 17” wide at
the bottom, and 15” wide at the top. It mounts at an angle – spaced out
from the head light bezel. The air flow up behind the screen is very important
The wind screen is a rigid mount non
adjustable and is designed to relieve some on the upper body
air pressure on the faster portions of your ride. Reduces upper body and back fatigue and allows for longer rides. Easy to look
over even for the shortest riders.
The production brackets are powder coated flat black and the plastic is only available clear.
The plastic used in the T C I Products Adventure touring wind screens is
produced by AeroFlow corp.
and is DOT approved "IMPLEX"
impact modified acrylic. No other aftermarket manufacturer uses
the thick acrylic (Many OEMs do) and we are the only to use the impact modified
acrylic. This stuff is not you’re off the shelf clear plastic.
Implex combines the U.V. stability (8 Years) and
other physical properties of standard acrylic sheet with impact resistance that
is 8 times greater than
extruded acrylic and 6 times greater
than cast acrylic.
It offers impact resistance along with excellent clarity and weather ability, resists
hazing, surface dullness and progressive yellowing. If scratched, Implex
can be rubbed out and if broken, will not shatter the way non-modified
The screen is NOT unbreakable- replacement plastic and hardware are
The plastic has a compound curve shape
and provides very good air flow control. Looks great on the bike! The brackets are
powder coated and install with no modifications to your bike.
Wind screens weigh approx 3.0# - 3.5# including the brackets.
Made by Craftsman in the USA
Use of the windscreen on motorcycles with aftermarket risers installed, Will require some ''Fitting and/or modifications'' for
-The easiest gently bend the top of the wind screen bracket to fit on top of
your installed riser. Some types of risers may require
the fabrication of a small ''Extension" tab for clearance. “Rox
risers” can be mounted with the riser between the handle bar clamps and the
wind screen brackets will mount normally.
***The headlight guard pictured is not part of the
windscreen, but available separately***
This product was added to our catalog on Monday 08 June, 2009.